Sealastone VP160 – Impregnating Sealer (Slow Dry)

  • Sealastone Degreaser
    VP 160 – IMPREGNATING SEALER (SLOW DRY)
    Ideal for all stone surfaces especially less porous Porcelain & Polished Stone
    Perfect for Limestone, Marble, Slate, Sandstone, Terracotta & most other Masonry Surface

VP45 – Impregnating Sealer (Fast Dry)

Impregnating Sealer for Natural Stone:

  • Ideal for Limestone, Marble, Slate, Sandstone, Terracotta & most other Masonry Surfaces
  • Protection against Water & Oil based stains!
  • Preserves & Protects without altering original colour or appearance!
  • Durable, Invisible, Stain Resistant Protection!
  • Resists UV Degradation!
  • Allows treated surfaces to Breathe!
  • Superior coverage per square metre!

USE Test in obscure area to determine suitability for the intended use. Surface should be clean, dry and free from any waxes, coatings or finishes. Protect any painted or stained surface adjacent to the application area. Apply one good coat to the polished porcelain with a lambs wool mop, roller, brush or pump sprayer. Leave for a minimum of five hours for drying and deep penetration, then apply a second coat to the area. Buff treated area before the second coat is dry. Use a rag or a buffing machine with soft pad. For optimum results, allow the treated surface to cure for 24 hours after buffing. Use the same application directions for other highly polished surfaces, such as marble or granite.

GENERAL APPLICATION INSTRUCTIONS FOR GROUT, TILE OR MASONRY PRODUCTS - FOR BOTH INTERIOR AND EXTERIOR USE Test in obscure area to determine suitability for the intended use. Surface should be clean, dry and free from any waxes, coatings or finishes.Protect any painted or stained surface adjacent to application area. Apply to surface in a thin, even coat with a pump, airless sprayer, brush, cloth, mop or roller. One coat is normally sufficent, but a second application is recommended on more porous surfaces or heavy walkway areas to ensure complete coverage. For optimum results, the treated area should be kept dry and free from soils for at least 24 hours.

COVERAGE 1 Litre will cover approximately up to 40m² depending upon the material to be treated and method of application.

Quantities: 1 Litres - 6 per Carton | 5 Litres - 4 per Carton

Our slower drying impregnator specifically formulated to seal densers substrates that require longer for the sealant to penetrate into the substrate such as porcelain, granite and marble, but works equally as well in preventing oil and water-based stains on all types of tile and masonry surfaces, including sandstone, limestone, terracotta and concrete.

If doing larger areas we would recommend this as the slower drying time allows you to see where you have applied.

Technical Information Download